-
Structure and function of lead-acid battery
The lead-acid battery is generally composed of 3 or 6 single cells in series, consisting of plates, separators, electrolyte, a shell, poles and a liquid filler plug (not available ...- Industry news
- By: JinHan
- Jan 23,2023

-
Introduction of OPzV battery
OPzV solid state lead battery is also known as OPzV sealed tubular solid state battery. OPzV is German abbreviation: O-Ortsfest (solid state), Pz-PanZerplate (tubular plate), V-Ver...- Industry news
- By: JinHan
- Jan 16,2023

-
Correlation between various technical indexes of separator
The increase of fine fiber content in the partition fiber ratio will improve the appearance performance, increase the liquid absorption, increase the penetration speed, and reduce ...- Industry news
- By: JinHan
- Jan 09,2023

-
Why PE battery separator fiber is made into single layer and multi-layer
〓 In order to prolong the cycle life of PE battery separator, it is necessary to ensure that the plate is always in a compressed state during the battery cycle. The ...- Industry news
- By: JinHan
- Jan 02,2023

-
The battery discharge conditions
Battery discharge current. Generally speaking, it is the discharge rate. There are time rate and current rate for the discharge current of the battery. Discharge time rate refers t...- Industry news
- By: JinHan
- Dec 29,2022

-
Do you know what is the SOH and SOC of the battery?
The health state of the battery is expressed by SOH, which is the full name of State of Health. If the battery is regarded as a container for storing electricity, SOC refers to how...- Industry news
- By: JinHan
- Dec 26,2022

-
Why does VRLA battery need tight assembly?
The electrolyte of valve regulated lead acid battery is in a lean state, that is, most of the electrolyte is adsorbed in the superfine glass fiber membrane, and the rest is absorbe...- Industry news
- By: JinHan
- Dec 22,2022

-
Key points for replacing lead acid battery with lithium iron phosphate battery
1. Space problem of batteryUnder the same specification, the volume of lithium iron phosphate battery is only half of that of lead-acid battery, and the weight is only 35% of that ...- Industry news
- By: JinHan
- Dec 19,2022

-
The AGM separator of VRLA battery
The design of separator in valve regulated lead-acid battery The AGM separator shall be selected based on its own performance. According ...- Industry news
- By: JinHan
- Dec 15,2022

-
The main functions of the AGM separator in the battery
Absorbing glass fiber separator ( AGM battery separator ) is an important part of valve regulated lead-acid battery. Its performance and dosage directly affect the techni...- Industry news
- By: JinHan
- Dec 12,2022

-
Acid absorption saturation of battery separator in battery
The battery separator has a small pore size and high porosity, which is easy to retain the electrolyte, has a good liquid absorption rate and a fast penetrati...- Industry news
- By: JinHan
- Dec 08,2022

-
How to charge agm battery charger
AGM is an absorbable fiberglass mesh battery. Vehicles equipped with engine start-stop function are mostly equipped with AGM and EFB reinforced maintenance-free lead-acid batteries...- Industry news
- By: JinHan
- Dec 05,2022


English
Russian
Portuguese
Arabic
Bangla
Indonesian




