-
Can UPS batteries be mixed with old and new?
In the use of UPS batteries, sometimes new and old UPS batteries are used in series. As everyone knows, this approach will shorten the service life of UPS batter...- Industry news
- By: JinHan
- Sep 09,2022
-
Premature Capacity Loss (PCL) Repair Methods
Ⅰ. Characteristics of premature loss of capacityWhen low antimony or lead-calcium is the grid alloy, the capacity suddenly drops in the early stage of battery use (about 20 cycles)...- Industry news
- By: JinHan
- Sep 07,2022
-
Factors affecting the life of lead-acid batteries
The failure of lead-acid batteries is the result of a combination of many factors, which is determined by the internal factors of the plates, such as the composition of active subs...- Industry news
- By: JinHan
- Sep 05,2022
-
Failure Modes of Lead Acid Batteries
Due to the differences in the types of plates, manufacturing conditions and use methods, the reasons for the failure of batteries are different. To sum up, the failure of lead-acid...- Industry news
- By: JinHan
- Sep 02,2022
-
How to maintain lead-acid batteries
Temperature The temperature has a great impact on the battery. Too high or too low will lead to a decrease in battery life (hig...- Industry news
- By: JinHan
- Aug 31,2022
-
About the memory effect of lead-acid batteries
The battery memory effect refers to the reversible failure of the battery, that is, the performance that can be restored after the battery fails. The battery automatically ma...- Industry news
- By: JinHan
- Aug 29,2022
-
Do lead-acid batteries charge the same way as lithium batteries?
The charging control methods of lead-acid batteries and lithium battery chargers are different. The difference is that the materials used are different, and the...- Industry news
- By: JinHan
- Aug 26,2022
-
How much do you know about EFB and AGM batteries?
When it comes to batteries, we have to say the car start-stop system. That is, when the vehicle is temporarily stopped (such as waiting for a red light) during the driving process,...- Industry news
- By: JinHan
- Aug 24,2022
-
Sealing mechanism of VRLA battery
The difficulty of sealing lead-acid batteries is the electrolysis of water during charging. When the charging reaches a certain voltage (generally above 2.30V/cell), oxygen is rele...- Industry news
- By: JinHan
- Aug 22,2022
-
Review of lead-acid battery separators
In the traditional flooded lead-acid battery, the separator only acts as an inert spacer to prevent the short circuit of the positive and negative electrodes. It needs to have good...- Industry news
- By: JinHan
- Aug 19,2022
-
Battery formation
Formation, which means conversion, is the process in which the cured green plate is converted into a cooked plate under the action of electric energy.The cured plate is commonly kn...- Industry news
- By: JinHan
- Aug 17,2022
-
Take you to understand the VRLAB
The working principle of VRLAB can be summarized as follows: The positive electrode plate undergoes water decomposition reaction, which causes O2&nb...- Industry news
- By: JinHan
- Aug 15,2022