-
Failure Modes of Lead Acid Batteries
Due to the differences in the types of plates, manufacturing conditions and use methods, the reasons for the failure of batteries are different. To sum up, the failure of lead-acid...- Industry news
- By: JinHan
- Sep 02,2022

-
How to maintain lead-acid batteries
Temperature The temperature has a great impact on the battery. Too high or too low will lead to a decrease in battery life (hig...- Industry news
- By: JinHan
- Aug 31,2022

-
About the memory effect of lead-acid batteries
The battery memory effect refers to the reversible failure of the battery, that is, the performance that can be restored after the battery fails. The battery automatically ma...- Industry news
- By: JinHan
- Aug 29,2022

-
Do lead-acid batteries charge the same way as lithium batteries?
The charging control methods of lead-acid batteries and lithium battery chargers are different. The difference is that the materials used are different, and the...- Industry news
- By: JinHan
- Aug 26,2022

-
How much do you know about EFB and AGM batteries?
When it comes to batteries, we have to say the car start-stop system. That is, when the vehicle is temporarily stopped (such as waiting for a red light) during the driving process,...- Industry news
- By: JinHan
- Aug 24,2022

-
Sealing mechanism of VRLA battery
The difficulty of sealing lead-acid batteries is the electrolysis of water during charging. When the charging reaches a certain voltage (generally above 2.30V/cell), oxygen is rele...- Industry news
- By: JinHan
- Aug 22,2022

-
Review of lead-acid battery separators
In the traditional flooded lead-acid battery, the separator only acts as an inert spacer to prevent the short circuit of the positive and negative electrodes. It needs to have good...- Industry news
- By: JinHan
- Aug 19,2022

-
Battery formation
Formation, which means conversion, is the process in which the cured green plate is converted into a cooked plate under the action of electric energy.The cured plate is commonly kn...- Industry news
- By: JinHan
- Aug 17,2022

-
Take you to understand the VRLAB
The working principle of VRLAB can be summarized as follows: The positive electrode plate undergoes water decomposition reaction, which causes O2&nb...- Industry news
- By: JinHan
- Aug 15,2022

-
AGM Battery and VLRA Battery
Pb-Ca-Sn alloy grids are used in lead-acid batteries, and hydrogen evolution inhibitors are added to the negative plates. The wet charging technology is widely used in the battery ...- Industry news
- By: JinHan
- Aug 08,2022

-
AGM separator
For flooded batteries, the basic function of micro-porous separator is to isolate the plates with opposite polarity, avoid electrical contact between them, and ensure hig...- Industry news
- By: JinHan
- Aug 05,2022

-
How to choose Non-woven Gauntlet and Polyester Gauntlet
BATTERY GAUNTLETSGauntlets are the most important parts of the tubular battery, which ensure good contact between the Positive Active Material and the positive plate spines, better...- Industry news
- By: JinHan
- Aug 03,2022


English
Russian
Portuguese
Arabic
Bangla
Indonesian




