-
Do you know what is the SOH and SOC of the battery?
The health state of the battery is expressed by SOH, which is the full name of State of Health. If the battery is regarded as a container for storing electricity, SOC refers to how...- Industry news
- By: JinHan
- Dec 26,2022
-
Why does VRLA battery need tight assembly?
The electrolyte of valve regulated lead acid battery is in a lean state, that is, most of the electrolyte is adsorbed in the superfine glass fiber membrane, and the rest is absorbe...- Industry news
- By: JinHan
- Dec 22,2022
-
Key points for replacing lead acid battery with lithium iron phosphate battery
1. Space problem of batteryUnder the same specification, the volume of lithium iron phosphate battery is only half of that of lead-acid battery, and the weight is only 35% of that ...- Industry news
- By: JinHan
- Dec 19,2022
-
The AGM separator of VRLA battery
The design of separator in valve regulated lead-acid battery The AGM separator shall be selected based on its own performance. According ...- Industry news
- By: JinHan
- Dec 15,2022
-
The main functions of the AGM separator in the battery
Absorbing glass fiber separator ( AGM battery separator ) is an important part of valve regulated lead-acid battery. Its performance and dosage directly affect the techni...- Industry news
- By: JinHan
- Dec 12,2022
-
Acid absorption saturation of battery separator in battery
The battery separator has a small pore size and high porosity, which is easy to retain the electrolyte, has a good liquid absorption rate and a fast penetrati...- Industry news
- By: JinHan
- Dec 08,2022
-
How to charge agm battery charger
AGM is an absorbable fiberglass mesh battery. Vehicles equipped with engine start-stop function are mostly equipped with AGM and EFB reinforced maintenance-free lead-acid batteries...- Industry news
- By: JinHan
- Dec 05,2022
-
What's wrong with the battery bulge?
During the use of the battery, the problem of swelling and cracking, or even explosion, may occur, whether it is a new battery or an old battery. The main reasons for battery infla...- Industry news
- By: JinHan
- Dec 01,2022
-
Reagents added to battery separators to prevent liquid corrosion
The BATTERY SEPARATOR is an integral part of the battery. In the valve-regulated lead-acid battery, the battery separator can prevent the active material of the plate fro...- Industry news
- By: JinHan
- Nov 28,2022
-
Dry cell vs wet cell batteries
One of the obvious differences between dry cell batteries and wet cell batteries is that the electrolytes of wet cell batteries are liquid, while the electrolytes of dry cell batte...- Industry news
- By: JinHan
- Nov 24,2022
-
Classification of car batteries
Generally speaking, the batteries used in automobiles are mainly divided into two types: water-added lead-acid batteries and maintenance-free lead-acid batteries. At...- Industry news
- By: JinHan
- Nov 21,2022
-
The main function of the safety valve
The battery safety valve, also known as the battery exhaust valve, is a valve that acts as a safety protection valve on a valve-controlled battery. When the battery is working...- Industry news
- By: JinHan
- Nov 17,2022