Features of UPS battery

The performance of UPS batteries is very superior. In normal times, you should maintain a suitable ambient temperature, charge and discharge them regularly, and replace spent/bad batteries in time. The following mainly shares the characteristics of UPS batteries.

1. Simple: When charging, the gas generated inside the UPS battery is almost absorbed and reduced to electrolyte, so there is basically no electrolyte.

2. High liquid holding capacity: The electrolyte is absorbed in the special separator and remains in a non-flowing state, so it can continue to be used even if it falls down.

3. Superior performance: when too much gas is released due to extreme overcharge operation errors, it can avoid the rupture of the battery.

4. The self-discharge is very small: the special lead-calcium alloy is used to produce the grid to control the self-discharge.

5. Long service life and good economy: UPS battery grids use special lead-calcium alloys with good corrosion resistance, and use special separators to keep the electrolyte, and then press the positive plates to be active to avoid falling, so it is a kind of Long life, economical battery.

6. Small internal resistance: Because the internal resistance is small, it has good high current discharge characteristics.

7. It has good recovery ability after deep discharge: once the phenomenon of long-term discharge occurs, it only needs to be fully charged, and the capacity will basically not appear, and it will be restored quickly.

      Want to view UPS battery container? Just click here!     

--End--