Home
>
12-04
/ 2023
In an era where clean and efficient energy storage is paramount, the Absorbent Glass Mat (AGM) battery separator has emerged as a star player in the world of battery technology. This article delves into the fascinating world of AGM battery separators, shedding light on their pivotal role in shaping a greener and more sustainable future.
09-04
/ 2023
AGM battery is a sealed lead-acid battery manufactured using absorbent glass mat technology. Its full name is Absorbent Glass Mat battery. AGM batteries are characterized by high capacity, low internal resistance, long lifespan, and no pollution, making them suitable for various applications, including:
03-27
/ 2023
The super battery is a kind of hybrid energy storage element, which is composed of two parts, including the lead-acid battery part and the asymmetric super capacitor part, which are connected in parallel in an internal non control circuit mode. The super battery realizes the integration of lead acid battery and super capacitor in terms of structure design and battery use function. The so-called integration is to combine the above two in the same single battery system.
01-09
/ 2023
The increase of fine fiber content in the partition fiber ratio will improve the appearance performance, increase the liquid absorption, increase the penetration speed, and reduce the maximum pore diameter, which is beneficial to the partition.
12-22
/ 2022
The electrolyte of valve regulated lead acid battery is in a lean state, that is, most of the electrolyte is adsorbed in the superfine glass fiber membrane, and the rest is absorbed by the electrode plate. In order to ensure that oxygen can diffuse to the negative electrode smoothly, the active substances of the membrane and electrode plate are required not to be saturated by the electrolyte, otherwise it will block the oxygen passage through the membrane, affecting the reduction of oxygen on the negative electrode. In order to make the chemical reaction go on normally, the active substance on the electrode plate must be fully contacted with the electrolyte, while the battery with electrolyte poor structure can only achieve this purpose by tight assembly.
12-15
/ 2022
The AGM separator shall be selected based on its own performance. According to the analysis of the function of the separator in the battery, the AGM separator shall have high acid absorption capacity, small shrinkage after acid absorption, reasonable microporous structure and low resistivity. According to the comprehensive performance requirements of the battery, the AGM separator should also have the characteristics of low impurity content, high tensile strength, fast infiltration speed, etc.